An Effect and Performance Characteristics of Intake Air Temperature in CI Engine
EXP 02
Comparison of Performance Cryogenic Treated and Untreated Carbide Inserts in Turning on AL& AL2 O3 Metal Matrix Composites
EXP 03
Effect and Experimental Investigation of Nano Fluid based Solar Water Heater
EXP 04
Efficient Method of Producing Oval Punching Holes on Sheet Metal With FEA Result
EXP 05
Effect of Thermo Mechanical Analysis of GMAW by using SA 387(Grade 12) Pressure Vessel Material
EXP 06
Comparative Performance Evaluation of PVD Coated and CVD Coated Inserts In CNC Turning of EN8 And EN47
EXP 07
Experimental Investigation and Thermal Analysis of Battered Region of EDM Machining on OHNS Die Steel
EXP 08
Design and stress analysis of oval punching holes on sheet metal
EXP 09
Comparative and Experimental Investigation of Aluminium-Boron Carbide Composites with Different Composition
EXP 10
Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 2024-Al2o3&Flyash Metal Matrix Composite
EXP 11
Evaluation of Machining Behaviours of Aluminium Metal Matrix Composite (AL+SIC+ZN)
EXP 12
Experimental Investigation in TIG Welding Parameter to Increase the Tensile Strength
EXP 13
Experimental and FEA of Angle Cutting Die to Attain Exact Geometry at Cutting Face
EXP 14
Experimental Investigation of Fibre Orientation in Glass Fibre Reinforced Thermoplastic Composites
EXP 15
Experimental Investigation and Engine Performance Characteristics of a Diesel Engine by Mahua Biodiesel
EXP 16
Experimental Investigation of the Properties and Wear Resistance of the Cr-N PVD Coatings
EXP 17
Experimental Investigation of the Properties and Wear Resistance of the Cr- N PVD Coatings for Tool Steel
EXP 18
The Investigation and Development of Small Amount Wear Evaluation and Transformed Layer Thickness by Friction Under Lubrication by Reflective Transmission Spectroscopy
EXP 19
Experiment Investigation to Increase the Mechanical Characterization of Aluminum with Silicon Carbide Composite
EXP 20
Experimental Investigation and Synthesis of FE3O4/AU Composite Nanoparticles and Evaluation of their Properties
EXP 21
Experimental and Optimization of Machining Parameters in EDM of CFRP Composite using Taguchi Technique
EXP 22
An Experimental Investigation of Multi- Layered Ceramic Coating on Piston
EXP 23
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 304 Austenitic Stainless Steel using M42 Cobalt Drill Bits
EXP 24
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 316 Austenitic Stainless Steel using M42 Cobalt Drill Bits
EXP 25
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 410 Austenitic Stainless Steel using M42 Cobalt Twist Drills
EXP 26
An Experimental Evaluation and Optimization of Dry Drilling Parameters of AISI 316 Austenitic Stainless Steel using Different Twist Drills
EXP 27
An Experimental Investigation and Implementation of Carbon Fibre With Banana for Brake Lining Application
EXP 28
Thermo Mechanical Analysis of Dissimilar Joints with EN24 and SS 409 Stainless Steel by using FCAW
EXP 29
Comparative performance evaluation of PVD coated and CVD coated inserts in CNC turning of EN8 & EN47
EXP 30
Analysis and Investigation of Generated During Pyrolysis of Waste Plastics and its Steam Cracking
EXP 31
An Experimental Investigation for Material Removal Rate in EDM using Tool of Graphite, Copper
EXP 32
Elastic Analysis of TUBE-FIN Structures Subjected to Combined Bending and Compression
EXP 33
An Experimental Investigation of Surface Modification in Stainless Steel by Aluminium Powder using Thermal Spray Technique
EXP 34
Experimental Analysis and Optimization of Electrical Discharge Machining on Inconel 600 with FEA
EXP 35
An Investigation and Proposal of a Solution for Unit Processing Time Job Shop Scheduling Problem
EXP 36
An Experimental Investigation of Mechanical Properties of Glass Fibre with Prosopis Julifora as Natural Fiber Reinforced Polymer Composites
EXP 37
An Investigation and Optimization of CFRP by using End Milling with Taguchi Technique
EXP 38
An Investigation of Ash Particle Formation During Combustion of a Simulated Coal
EXP 39
Analysis and Curvature Optimal Corner Smoothing Algorithm for Three and Five Axes Trajectory Generation
EXP 40
Analysis and Experimental Investigation of Gasification Behaviours of Woody Biomass in a Packed Red Reactor
EXP 41
Analysis and Experimental Suppression of Vibration in Cutting Machine
EXP 42
Analysis of Anodic Oxide Porous Alumina Templates and Development of Nanowire Surface Fasteners
EXP 43
Analysis of Characterization and Effects of Fiber Pull Outs in Hole Quality of Carbon Fiber Reinforced Plastics Composite
EXP 44
Analysis and Experimental Investigations of Weld Characteristics for a TIG Welding with SS 304L and 410
EXP 45
Analysis on Fabrication of Anodic Oxide Porous Alumina Templates and Development of Nanowire Surface Fasteners
EXP 46
Analysis of Oxy-Fuel Combustion Behaviours of Coal in a Fluidized Bed
EXP 47
Analysis on Non Destructive Evaluation of Thermal Fatigue Cracks on Metal Surface
EXP 48
Analysis and Effect of Swirl Flow on Combustion Field in Cyclone Jet Combustor
EXP 49
Analysis of Geometrical Effects of Carbon Fiber Reinforced Plastics Composite with Various Coated Drill Bits
EXP 50
An Experimental Investigation of Mechanical Properties of Jute Fibre with ABS and Prosposis Julifora as Natural Fiber Reinforced Hybrid Polymer Composites
EXP 51
Comparative and Experimental Investigation for Reducing Cutting Tool Wear Rate by Cryogenic Technique
EXP 52
Some Experimental Investigation on Die Steel in Electric Discharge Machining with Various Parameters and Electrode
EXP 53
Effect and Experimental Investigation of Boron Carbide in Tensile and Wear Characteristic of Aluminium Composite
EXP 54
An Experimental Investigation and Surface Roughness Prediction of D2 with Ball Mill Tooling using DRO Milling Process
EXP 55
Experimental Investigation and Fabrication of Removal of Iron and Manganese In Ground Water
EXP 56
Experimental Study on Thermal Ratcheting Behavior of Ferritice Heat Resistant Pipe Elements at Very High Temperatures Application
EXP 57
Experimental Investigation and Fabrication of Brake Pad using Natural Composite Material
EXP 58
FEA Analysis of Cutting Force Model in Milling Operation
EXP 59
FEA and Experimental Investigation and Thermal Properties of the Ceramic Coating on Aluminium Piston by Plasma Spray Technique
EXP 60
FEA Analysis and Experimental Evaluation of Piston with Plasma Spray Coating
EXP 61
FEA Analysis on Combustion Characteristics in Porous Medium Injector of Ultra Micro Combustor with Hydrogen Fuel (In the Case of Fibrous Porous Media)
EXP 62
Experimental Investigation on Aluminium Metal Matrix Composite in EDM with Various Parameters (AL+SIC+ZN)
EXP63
Experimental Investigation in TIG Welding Parameter to Increase The Tensile Strength, Surface Finish, in HAZ using Various Destructive Test and FEA
EXP 64
Experimental Investigation of the Properties and Wear Resistance of the TI-N Plasma Spray Coatings for Tool Steel
EXP 65
Investigation and Effect of Atmospheric Pressure Plasma on Soot and NOX Emissions
EXP 66
FEA Numerical and Experimental Investigation of Ceramic Coating on Engine Valve by Plasma Spray Technique
EXP 67
Experimental Investigation of Glass Fibre Epoxy Reinforced with Coconut and Coir Fibre
EXP 68
Geometrical Evaluation and Surface Roughness in Drilling Al 6082 –B4C & Flyash Metal Matrix Composites using DOE Principle
EXP69
Geometrical Evaluation and Surface Roughness in Drilling Al 2024 -SI3N4 Metal Matrix Composites using DOE Principle
EXP 70
Experiment Investigation to Increase the Mechanical Characterization of Aluminium with Silicon Carbide Composite
EXP 71
Numerical Study on Combustion Characteristics of Rich-Premixed Gas Opposed by High Temperature Air using Elementary Reaction
EXP 72
Numerical Analysis and Simulation of DPF Regeneration Process
EXP 73
Optimization and Mechanical Property Analysis of Friction Drilling On Aluminium and Alloy Steel by using Tungsten Carbide Drill Bit
EXP 74
Performance Analysis and Experimental Investigation of Brake Pad using Aluminium –Silicon Carbide
EXP 75
Numerical Study on Interaction between Flame and Wall of Propane Air Premixed Flame
EXP 76
Machinability Evaluation and Optimization of Carbon Fiber Reinforced Plastic by using CNC Turning
EXP 77
Performance Investigation & Comparison of Different Phase Change Material in Heat Exchanger
EXP 78
Performance and Emission Characteristics of Diesel Engine Blended with Eucalyptus Methanol Groundnut Oil with KOH
EXP 79
Optimization and Mechanical Property Analysis of Friction Drilling on Aluminium and Alloy Steel by using K20 Solid Carbide Drill Bits
EXP 80
Numerical Study on the Combustion Characteristics in Ultra –Micro Combustor with Porous Wall Considering Surface Reaction
EXP 81
Numerical Analysis on Combustion Behaviour of Fuel Spray Injected into High Temperature Air
EXP 82
Investigation of Functional Improvement and Mechanical Evaluation of Fatigue Crack Healing by Surface Activated Pre Coating Method
EXP 83
Investigation and Fabrication of Atmospheric Air Pollution Removal for Domestic and Industrial Usage
EXP 84
Study on Tar Decomposition Characteristics During High Temperature Steam Gasification of Plastic Wastes
EXP 85
The Tribological Property Comparison of IBAD CNX and DLC Coating
EXP 86
Study on Combustion Characteristics of Pulverized Coal by Air Mixed with Hydrogen
EXP 87
Study on Quantitative Evaluation of Pipe Wall Thinning using Frequency Characteristics of Microwave Method
EXP 88
Investigation of Change of Ash Compositions in Cokes during Combustion Process
EXP 89
Performance Analysis of Renewable Energy Thermo Electric Refrigeration System
EXP 90
Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 6063- ZRO2 & Flyash Metal Matrix Composite
EXP 91
Study on Effects of Flue Gas Circulation on NOX Emission Coal Combustion
EXP 93
Thermal Stresses Due to Electrical Discharge Machining on D3 Steel
EXP 94
Performance, Combustion and Emission Characteristics of Urea-SCR in C.I. Engine Fuelled with Diesel – Pine Oil – Eucalyptus – KOH Blends with Multi-Layered Ceramic Coated Piston
EXP 95
Performance, Combustion and Emission Characteristics of Pine Oil – Eucalyptus – KOH - and its Diesel Blends in a DI Diesel Engine using Ceramic Coated Piston
EXP 96
Geometrical Evaluation and Surface Roughness in Drilling Al 6061 –AL2O3&SIC Metal Matrix Composites using DOE Principle
EXP 97
Geometrical Evaluation and Surface Roughness in Drilling Al 60161 –AL2O3&ZRO2 Metal Matrix Composites using DOE Principle
EXP 98
Geometrical Evaluation and Surface Roughness in Drilling Al 7075 –ALN& SIC Metal Matrix Composites using DOE Principle
EXP 99
Estimation of Circularity, Cylindricity and Surface Roughness in Drilling on Forged Plate of Al 5052-B4C& Flyash Metal Matrix Composite
EXP 100
Study on Ash Deposition on a Heat Transfer Tube and its Control in a Waste Incinerator
EXP 101
Experimental Analysis and Geometrical Effect on En24 in CNC Drilling with Coated Drill Bit
EXP 102
Experimental Investigation in Arc Welding Parameter to Reduce the Residual Stress Analysis for Avoid Cold Cracks
EXP 103
Surface Characteristics and Machining Performance of Hard Carbon Coated And HSS Drill Bits On AA6082
EX 104
Comparative Analysis of Drilling Performance and Process Parameter Optimization on HCHCR with Coated and Uncoated Drill Bits
EX 105
Coating Efficiency And Drilling Characterizes Optimization On AZ91-MG With Hard Carbon And HSS Drill Bits With DOE Technique
EX 106
Experimental Study of Drilling Parameters on Machining and Geometrical Character of UHMWPE by using Coated and Uncoated Drill Bits
EX 107
Comparative Analysis of Drilling Characteristics On Hybrid Fiber Composites With Taguchi Based GRA
EX 108
Coating Efficiency and Drilling Characterizes Optimization on AZ91 under Dry Conditions with DOE Technique
EX 109
Process Optimization of Hybrid Metal Matrix with Different Coated Drill Bits Based On Drilling Process Parameters
EX 110
An Investigation and Machinability Evaluation of SS304 with Different Coated Drill Bits by Using VMC
